1. Taking all automobile manufacturers and measured of the wheelbase, axle load, given the statistical results of the wheelbase vehicle and the ratio of axle load distribution.
综合各汽车厂家和实测的轴距、轴重，给出了各代表车型的轴距、轴重分配比例的统计结果。
来自互联网
2. When under the same axle load, if the wheel rolling speed gets higher, the adhesion coefficient declines as the ratio of the mean asperities contact pressure to the total pressure becomes smaller.
研究发现：相同轴重下，滚动速度越大，粗糙峰接触压力与总压力的比值越小，导致轮轨之间的粘着系数下降；
来自互联网
3. When under the same speed, if the axle load gets weighter, the adhesion coefficient increases as the ratio of the mean asperities contact pressure to the total pressure becomes bigger.
相同速度下，轴重较大，粗糙峰接触压力占总压力的比值也越大，此时粘着系数也较大。
来自互联网
4. In determining the main reduction ratio, the drive axle of the mechanical and structural analysis, and calculated the school.
在确定了主减速比之后，通过对驱动桥的力学和结构分析，进行计算校和。
来自互联网
5. The main parameters, such as the principal axle speed, weft ratio and warp tension can be real-time showed in the screen of computer and can be changed according to…
织机的主要工作参数如主轴转速、引纬率、经纱张力等都能够在计算机屏幕上实时显示并能够根据需要调节。
来自互联网
6. The main parameters, such as the principal axle speed, weft ratio and warp tension can be real-time showed in the screen of computer and can be changed according to…
