1. You can create an access list of IP addresses that tells the router which computers on the network require NAT.
你可以创建一个IP地址的访问列表,告诉路由器网路中哪些计算机需要NAT 。

来自互联网

2. NAT only translates traffic which travel between the inside and outside network and is specified to be translated.
NAT仅转换在内部和外部网络之间被指定需要被转换的流量。

来自互联网

3. As you can see, the NAT router stores the IP address and port number of each computer in the address translation table.
正如你所见,NAT路由器将每台计算机的IP地址和端口号都存储在地址转换表中。

来自互联网

4. The problem was, of course, Nat Turner's Insurrection; it had just occurred in October of 1831 and they held these debates in the wake of it.
问题当然是纳特·特纳的起义;它发生在1831年10月,他们把这些议题推到起义之后。

来自互联网

5. Define the port as a NAT port.
定义端口为NAT端口。

来自互联网

6. NAT can be configured in various ways.
有多种方法能配置NAT。

来自互联网

7. Nat: i'm ten. (silent) i really like her.
奈特:我已经十岁了。(沉默一会儿)我真的很喜欢她。

来自互联网

8. This is where NAT (RFC 1631) comes to the rescue.
这就是NAT (RFC 1631)需要拯救的地方。

来自互联网

9. NAT is like the receptionist in a large office.
面具之后NAT就像一个大办公室里的传达员。

来自互联网

10. So what does the size of the Internet have to do with NAT?
那么面对日益庞大的因特网,NAT该做什么呢?

来自互联网

11. There are three table options available: filter, NAT and mangle.
有三种可用的表选项:filter、nat和mangle。

来自互联网

12. For this scenario, we will select Use network address translation (NAT).
在这里,我们将选择usenet workaddresstranslation (NAT)。

来自互联网

13. Notice, by the way, that the example immediately above works through NAT.
顺便说一下,请注意上面这个例子通过NAT 也能很好地工作。

来自互联网

14. The NAT router translates traffic coming into and leaving the private network.
NAT路由器传送进出私有网络的示意图。

来自互联网

15. The shortage of IP addresses is only one reason to use NAT. Two other good reasons are
IP地址的短缺仅仅是使用NAT的一个原因。

来自互联网

16. The NAT router checks the routing table to see if it has an entry for the destination address.
这个nat路由器检查它的路由表,查看有没有包含这个数据包目的地址的条目。

来自互联网

17. Nat Geo Wild is a rare example of a network that was developed abroad and imported to America.
《国家地理野生频道》是极少的在海外制作再进口至美国的电视网的例子。

来自互联网

18. We used the -m option to specify NAT, and weight each realserver equally with a weight of 1 (-w 1).
我们使用了- m选项指定NAT,并给每个realserver赋以权重1 (- w 1)。

来自互联网

19. If static NAT alone is configured and no entry is found, it sends the packet without translation.
如果仅仅是配置了静态NAT且没有这样的条目存在,路由器就会不转换地址而直接转发数据包。

来自互联网

20. I posted some of these thoughts to the Radar backchannel list and Nat responded with his usual insight.
我把这些想法发布在Radar的backchannel列表上,Nat对此给出了自己的看法。

来自互联网

21. NAT technology maps an external public IP address to an internal IP address within the Amazon EC2 network.
NAT技术将外部公共IP地址映射到AmazonEC2网络中的内部 IP 地址。

来自互联网

22. Win4Lin sessions can be configured with bridged networking or network address translation (NAT) networking.
Win4L in会话可以配置为使用桥接连网或网络地址转换(NAT)连网。

来自互联网

23. For more information on definitions of local and global addresses, refer to NAT: Local and Global Definitions.
更多关于本地和全局地址的定义参见NAT:LocalandGlobalDefinitions。

来自互联网

24. This means that it's behind a Network Address Translation (NAT) and therefore cannot receive inbound connections.
这意味着它无法通过网络地址转换(NAT),因此不能接收呼入服务。

来自互联网

25. The nat table is used for packets to be forwarded and consists of PREROUTING, OUTPUT, and POSTROUTING chains.
nat表用于要转发的信息包,它包含PREROUTING 、OUTPUT和POSTROUTING链。

来自互联网

26. The nat table is used for packets to be forwarded and consists of PREROUTING, OUTPUT, and POSTROUTING chains.
nat表用于要转发的信息包,它包含PREROUTING 、OUTPUT和POSTROUTING链。

来自互联网